There are many simple solutions to tramp oil problems (see Tramp Oil Separators), but when solids are also a problem the 3-Phase Turbo Separator is the solution you are looking for. All Turbo 3-Phase Separators operate at high speeds to remove both tramp oil and fine solids from machine tool coolants, parts washer fluids and similar applications. The large solids handling capacities of 3-phase Turbo Separators makes them ideal for grinding applications.
The Turbo T10-3 is a complete centrifuge system which continually discharges cleaned coolant into a storage tank while tramp oil is discharged into a smaller decantation tank. Solids are periodically cleaned from the self-draining bowl. Processing capacity is up to 90 GPH.
The Turbo T14-3AQ is a complete centrifugal filtration/purification system designed to remove solids and free oil from aqueous bath solutions. The T14-3AQ can reduce waste volumes, disposal costs, and new bath solution purchases by as much as 98%.
The T40-3 separator is a fully automatic self-cleaning centrifuge for applications where higher flows are required. Cleaned coolant is discharged continually during the run/feed mode while tramp oil is separated and discharged in a separate liquid stream. During the automatic cleaning cycle, feed is stopped and the solids are discharged from the bowl.